Vineyards

Foliar Fertilizers Products produced by Ecotech, LLC, are simple to apply. They’re dry shipped and have a general mix ratio of 50 to 1 (i.e. 50 gallons water to 1 lb. of Agrostim, Agroprime™ or Supergrow).

Recommended product amount is 1 lb. to 1.5 lbs. per acre for vineyards with a minimum of 4 applications or ideally 5-8 applications regardless of spray intensity. The number of sprays can be increased or decreased depending on frequency of applications. We are recommending 5 to 8 lbs. of total product be applied per acre per crop cycle. Recommended application cycle is 1-2 applications prior to bloom and 3-6 applications after bloom. For vines that are in need of accelerated recovery due to frost damage, stress, poor soil conditions, plant nematodes, fungal diseases, etc., then 1.5 – 2.0 lbs. per acre per application is recommended.

Given the organic composition of the products, they can be mixed with most anything else you’re applying (i.e. fungicides, etc.) without any negative impact on the mixed product’s performance, our product’s performance or the plant itself. Products are compatible with low volumes sprayers at 30 gallons per acre all the way up to higher volumes at 100 gallons per acre.

Products can be used in commercial sprayers or applied via irrigation and drip systems. All products are water soluble and shouldn’t clog emitters or sprayers if they are first mixed into a 5 gallon bucket to dissolve the product thoroughly prior to placing into the sprayer holding tank or fertigation feeder system.


Application Chart

Agrostim™

Agroprime™™

Supergrow™

Water Minimum Area

Coverage

Application Frequency Total Application Per Plant Cycle
5 – 7.5 lbs. 250

Gallons

75,000

sq. ft.

Once every

2-3 weeks

4 – 8

applications total

3 – 4.5lbs. 150

Gallons

50,000

sq. ft.

Once every

2-3 weeks

4 – 8

applications total

1 – 1.5 lb. 50

Gallons

25,000

sq. ft.

Once every

2-3 weeks

4 – 8

applications total

Agrostim, Agroprime™ or Supergrow have a minimum shelf life of 3 years.