Innovative products for a changing industry

Application: Vineyards

Products are simple to apply. They’re dry shipped and have a general mix ratio of 50 to 1.5 (i.e. 50 gallons water to 1.5 lbs. of Agrostim, Agrostim FVO or Supergrow).

Recommended product amount is 1 lb. to 1.5 lbs. per acre for vineyards with a minimum of 4 applications or ideally 5-8 applications regardless of spray intensity. Recommended application cycle is 1-2 applications prior to bloom and 3-6 applications after bloom. For vines that are in need of accelerated recovery due to frost damage, stress, poor soil conditions, plant nematodes, fungal diseases, etc., then 1.5 - 2.0 lbs. per acre per application is recommended. We are recommending 5 to 8 lbs. of product be applied per acre per crop cycle regardless of spray frequency.

Given the organic composition of the products, they can be mixed with most anything else you’re applying (i.e. fungicides, anti-mildews, etc.) without any negative impact on the mixed product’s performance, our product’s performance or the plant itself. Products are compatible with low volumes sprayers at 30 gallons per acre all the way up to higher volumes at 100 gallons per acre.

Products can be used in commercial sprayers or applied via irrigation and drip systems. All products are water soluble and shouldn’t clog emitters or sprayers if they are first mixed into a 5 gallon bucket to dissolve the product thoroughly prior to placing into the sprayer holding tank or fertigation feeder system.


Application Chart

Agrostim™
Agrostim FVO™
Supergrow™
Water Minimum Area
Coverage
Application Frequency Total Application Per Plant Cycle
5 – 7.5 lbs. 250
Gallons
75,000
sq. ft.
Once every
2-3 weeks
4 – 8
applications total
3 – 4.5lbs. 150
Gallons
50,000
sq. ft.
Once every
2-3 weeks
4 – 8
applications total
1 – 1.5 lb. 50
Gallons
25,000
sq. ft.
Once every
2-3 weeks
4 – 8
applications total

Agrostim, Agrostim FVO or Supergrow have a minimum shelf life of 3 years.